Lexmark 522n - C Color Laser Printer, Service Manual

Page: 56 / 334

2-28
Service Manual
4520-xxx
52 Flash Full This message is displayed when there is not
enough free space in the flash memory to hold
the resources that have been requested to be
written to flash.
53 Unformatted Flash This message is displayed when the printer
detects an unformatted flash at power on. Press
Go to clear the message. The flash is marked as
bad and normal operation continues. Flash
operations are not allowed until the flash is
formatted.
54 Standard Serial Error This error is displayed when a serial error
(framing or parity) is detected on the standard
serial port. This usually indicates the serial port is
not set up correctly.
54 Serial Option X Error This error is displayed when a serial error
(framing or parity) is detected on the optional
serial port. This usually indicates the optional
serial port is not set up correctly.
56 Standard Serial
Disabled This error is displayed when data is sent to the
printer across the standard serial port, but the
port has been disabled.
56 Parallel Port Disabled This error is displayed when data is sent to the
printer across the parallel port, but the parallel
port has been disabled. Once this message is
displayed, reporting of further errors is
suppressed until the menus are entered, or the
printer is reset.
58 Too Many Trays
Attached This error code is displayed when too many input
trays are attached to the printer.
58 Too Many Disks
Installed This error is displayed when too many disks are
attached to the printer.
61 Defective Disk This error code is displayed when the printer
detects a defective disk. This error may occur at
power on or during disk format and write
operations. While this message displays: Press
Go to clear the message. The disk is marked
defective and normal printer operations continue.
Disk operations are not allowed with a defective
disk. The Format Disk menu is not shown.
User Error Message Explanation