Lexmark 522n - C Color Laser Printer, Service Manual

Page: 150 / 334

3-18
Service Manual
4520-xxx
Printer Setup
Setting the Page Count
This lets the servicer change the page count from the diagnostic
menu. This is used whenever the engine board is replaced because
this board contains the printer NVRAM Memory where the page
count is stored.
To set the Page Count:
1. Select Page Count from the Diagnostic menu.
•
The current page count displays.
•
The leftmost digit blinks, indicating it is the first digit to be
changed.
2. Press either Menu until the value you want displays.
3. Press Select to move to the next digit, press Menu until the
value you want displays. Continue with each digit until you set
the page count. You can skip any digit by pressing Select.
4. Press Select to save the new page count in NVRAM.
5. Press Return/Stop to exit the Diagnostic menu.
Viewing the Permanent Page Count
The Permanent Page Count can only be viewed and cannot be
changed.
To view the Permanent Page Count:
1. Select Permanent Page Count from the menu.
2. Press Return/Stop to exit the Diagnostic menu.