Lexmark 363dn - X B/W Laser, Service Manual

Page: 95 / 250

Diagnostic aids
3-3
7013- XXX
BASE SENSOR TEST See “Base Sensor Test” on page 3-12 .
Front Door
Input
Fuser Exit
Standard Bin
DEVICE TESTS See “Printer Setup” on page 3-12 .
Flash Test
PRINTER SETUP
Defaults See “Defaults” on page 3-12 .
Perm Page Count See “Page Counts” on page 3-12 .
Serial Number See “Serial Number” on page 3-13 .
Engine Setting 1 through 4
Model Name See “Model Name” on page 3-13 .
Configuration ID See “Configuration ID” on page 3-13 .
Edge to Edge
Enable Edge to Edge Copy See “Enable Edge to Edge Copy” on page 3-14 .
EP SETUP
EP Defaults See “EP Defaults” on page 3-14 .
Fuser Temp See “Fuser Temperature (Fuser Temp)” on page 3-14 .
Transfer Adjust See “Transfer” on page 3-14 .
Print Contrast See “Print Contrast” on page 3-14 .
Charge Roll See “Charge Roll” on page 3-14 .
Gap Adjust See “Gap Adjust” on page 3-14 .
Auto Dark Adj See “Automatic Darkness Adjustment (Auto Dark Adj)” on page 3-15 .
REPORTS
Menu Settings Page See “Menu Settings Page” on page 3-15 .
EVENT LOG
Display Log See “Display Log” on page 3-15 .
Print Log See “Print Log” on page 3-16 .
Clear Log See “Clear Log” on page 3-16 .
Scanner Tests
ASIC Test See “ASIC Test” on page 3-17 .
Feed test See “Feed Test” on page 3-17 .
Sensor Test See “Sensor Test” on page 3-17 .
EXIT DIAGNOSTICS This selection exits Diagnostics mode, and
Resetting the Printer
displays. The printer performs a POR and returns to normal mode.
Diagnostics mode tests (continued)
All manuals and user guides at all-guides.com