Lexmark 363dn - X B/W Laser, Service Manual

Page: 107 / 250

Diagnostic aids
3-15
7013- XXX
Automatic Darkness Adjustment (Auto Dark Adj)
This setting attempts to optimize the amount of toner used when printing with a specific operating point. Each
time this setting executes, the printer performs the following:
•
Calibrates its toner density sensor
•
Measures the reflectivity of its bare drum
•
Prints patches on the drum and measures the drum’s reflectivity through the patches
•
Cleans the transfer roll
•
Calculates reflectivity ratios and operating points in order to attain each operating point’s
darkness target
•
Modifies the EP mechanism as necessary to adjust toner darkness.
No messages are displayed on the operator panel to give any indication that this test is running. When
deactivated, the printer disables.
Reports
Menu Settings Page
To print the Menu Settings Page:
1.
Select Reports from Diag Menu, and press Select ( ).
2.
Select Menu Settings Page , and press Select ( ).
Event Log
Display Log
The event log provides a history of printer errors. It contains the 12 most recent errors that have occurred on the
printer. The most recent error displays in position 1, and the oldest error displays in position 12 (if 12 errors have
occurred). If an error occurs after the log is full, the oldest error is discarded. Identical errors in consecutive
positions in the log are entered, so there may be repetitions. All 2
xx and 9 xx error messages are stored in the
event log.
To view the event log:
1.
Select EVENT LOG from Diag Menu, and press Select ( ).
2.
Select Display Log , and press Select ( ).
Up to three error codes display at a time. Press or to view additional error codes. Press to view
additional details.
Press Back (
)
to return to the EVENT LOG menu.
All manuals and user guides at all-guides.com