Lexmark 25**-100, Service Manual

Page: 24 / 188

2-4
Service Manual
25XX-100, -110
Power
Ready
Paper Out
Panel Lock
Font Lock ON
Blinking
Blinking
Blinking
Blinking Beeps
10
times Home Position Error
Go to “Carrier service check”
on page 2-18 .
Tractor 2 Home Position Error
If Tractor 2 is installed, remove it
to determine whether the problem
is with the Carrier Home Position
sensor or the Tractor 2 Home
Position sensor. See the
“Tractor 2 service check” on
page 2-36
.
None Home Position Error Without
Alarm
Go to “Power service check”
on page 2-30 .
Power
Ready
Tractor 2
Paper Out
Font Lock ON
Blinking
Blinking
Blinking
Blinking None Timer Error
Turn the printer off and then back
on. If you get the same error
during power-up, replace the logic
board and readjust the
bidirectional print adjustment.
Go to “Bidirectional print
adjustment” on page 4-4 .
Power
Ready
Tractor 2
Paper Out
Font Lock ON
Blinking
Blinking
Blinking
Blinking None Hardware Drive Error
The printhead or the printhead
cable(s) can cause this error. Go
to
“Printhead service check”
on page 2-32 .
Turn the printer off and then back
on. If you get the same error,
replace the logic board and
readjust the bidirectional print
adjustment. Go to
“Bidirectional
print adjustment” on page 4-4 .
If the printer completes POST
successfully and eventually gets
the same error, go to
“Intermittent problem service
check” on page 2-20
.
LED Status Alarm Action