Troubleshooting
Copying
Printing
Scanning
Faxing
Troubleshooting
82
Basics
Index
www.lexmark.com
Lexmark X125
Learning DRPD Failed
(with beep warning and
return to Ready state)
Check your telephone line connection.
Load Document
(with beep warning)
Load your document in the document support, and then press Start/
Yes.
Memory Full!
Your All-In-One is low on memory. The job is stopped. Try to send your
job again when more memory is available.
If you are using the fax function when this error message appears, the
sending machine should see a transmission error and send the fax
again.
Memory Full
(with return to Ready
state)
Wait for memory to become available, and send your job again, or turn
Memory XMIT off from the Setup menu or the Settings Utility. For help,
see
Customizing the fax settings
.
Memory Full, Continue
Press Start/Yes to print the fully-scanned pages and continue
scanning.
Press Cancel/No to cancel copying.
Memory Full, To Abort,
Cancel
Press Start/Yes to print the scanned pages in memory, and then
continue the scanning process.
Press Cancel/No to cancel the copy or fax job.
Message:
Solution:
