5-7
Owner's Manual Addendum
Controlling the LXP-1 with Two-Way Communication
LXP-1 Setups
LXP-1 machine types have a bank of sixteen user-programmable memo-
ries. Each of these memories stores a complete set of LXP-1 parameters
and is referred to in the MRC as an
Internal Setup. When connected for two-
way communication, you can also upload the parameters from any of the
128 user registers in the LXP-1. These are referred to in the MRC as
External
Setups (abbreviated “EXTRN” in the MRC display).
LXP-1
NAME
ALGORITHM
PARAMETERS
MIDI PATCHES
LXP-1
MRC
Internal
LXP-1
External
1
16
1
128
Selecting an LXP-1 Setup
Once communication has been established between the MRC and the LXP-
1, different internal and external setups can be selected whenever you are
running an LXP-1 machine. If the MRC is not currently running an LXP
machine, you must forst select one, then select the desired setup. Here’s
how :
1.
On the MRC, enter Machine Select Mode by pressing MACH twice.
2.
Use the leftmost slider, the MACH button or the keypad to select an LXP-
1 type machine. (Machine #1 is an LXP-1 machine when the MRC is
shipped from the factory.)
