Owner’s Manual
23
DD-8+ Power
4
5
6
2
1
3
3
Figure 12.
1. Route Identification
Indicates the input channels that the EQ are acting upon and the output(s) to which the equalized signal is being
routed.
2. Reset Equalizer
Turns off all EQ bands and resets all controls to flat. Does not return Bass, Treble controls nor High- Pass and Low-
Pass filters to flat.
3. Eq Band On/Off Toggle
Use the check boxes to turn on or off an EQ band. Default value is checkbox OFF. Use the minimum number of
frequency bands to achieve the desired result.
4. Frequency
Selects the center frequency of the frequency band to be increased or decreased. Use the slider icon, the up/
down arrows to select the desired center frequency or simply type in the frequency in the Freq(uency) box. Each
band can be set at any frequency from 40Hz – 22kHz.
ADVANCED OPERATION
