Owner’s Manual
19
DD-8+ Power
BASIC OPERATION
8. Turn On Vol
Sets the initial volume upon initial turn-on or restoration from Powerdown mode from -70dB (softest) to +12dB
(loudest). Volume level changes are effected either by directly typing in the desired value, sliding the indicator
icon or using the arrow up/down buttons.
9. Max Vol
Sets the “hard stop” maximum output volume regardless of the gain selected by external volume controls. It’s
a handy feature to prevent damage to loudspeakers and parental eardrums. Volume level changes are affected
either by directly typing in the desired value, sliding the indicator icon or using the arrow up/down buttons.
10. Limiter
The limiter tracks the level of the input audio signal and prevents it from exceeding a pre-determined threshold
by reducing its gain. Use the dropdown menu to select -3dB, -6dB or -9dB limiter settings. OFF is default.
Check For Firmware Update
IMPORTANT! Once you have accessed the DD8+ dashboard, you should immediately check for firmware updates.
1. Click
Check for Update
Hyperlink.
2. If your device is not up to date, you will
see your DD8+ version number does
not match the Latest Version.
3. Click the Click here to update! Button.
4. Wait for files to load. Do not interrupt
this process.
5. Once complete you will see your
firmware is up to date.
