DD-8+ Power
Owner’s Manual
30
Specifications
Output Power:
125W RMS per channel into 8 ohms from 20Hz – 20kHz
Frequency Response:
20Hz - 20kHz +0.2dB/–1.5dB
Total Harmonic Distortion (THD):
<0.02%, 1kHz (at full rated power)
<0.1%, 20Hz-20kHz (at full rated power)
Signal-to-Noise Ratio:
< –105dB below rated full power A-weighted
Crosstalk:
< –70dB @ 1kHz
Input Sensitivity:
1.12 volts for 125W out into 8 ohms
Gain:
29dB
Input Impedance (analog):
100K ohms typical
Trigger Input:
5V minimum – 15V maximum DC
Dimensions (H x W x D):
2.1" (w/ feet) / 1.7" (w/out feet) x 17.3" x 14.9"
5.4 cm (w/ feet) / 4.5cm (w/out feet) x 43.8 cm x 37.8 cm
Weight:
9.2 lbs (4.2 kg)
Power Requirements:
100 - 240VAC
50/60Hz
Mode
Power Consumption (W)
Heat Output (BTU/hr)
Standby Mode
<0.5
<2
Idle
<35
<120
Typical
<200
<260
Maximum
1000
680
* Typical usage is considered to be 1/8th power (pink noise) on all channels into the rated load (8 ohms).
APPENDIX
Part No. 070-90057 Rev. 2.0