5-17
The Presets
MA:B11P6 3VOICEDLYS
MB:B11P5 PINGOPONGO
The SoftSlider affects the delay spacing in both Machine effect presets. Increasing the SoftSlider will
make each delay effect longer and longer; decreasing it will make each delay effect shorter. The
SoftSlider value is set to 50 when the Setup is selected.
MA: B11P6 3VOICE DLYS
Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms, the
other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the SoftSlider.
MB: B11P5 PINGO PONGO
Ping - Pong delays bouncing back and forth. The SoftSlider controls the timing of the bounce.
P124 DM:CLUSTERS
SoftSlider
DELAY MACH B
40
MA:B12P4 EKOZ
MB:B11P6 3VOICE DLYS
This preset is intended for “dual-mono” use. The LFO is set to a Triangle shape moving at 2.48Hz.
The SoftSlider changes the spacing of the delays in Machine B.
MA: B12P4 EKOZ
EKOz makes use of the flange gliding delay and several recurring echoes.
MB: B11P6 3VOICE DLYS
Two taps (Delays 3 and 4 ) are set with delay ratios of 1:2, meaning that, when one is 200ms, the
other is 400ms, or when one is 359, the other is 718ms. This relationship is patched to the SoftSlider
controller.....
P125 DM:2 FLANGES
SoftSlider
INPUT PAN
0
MA:B12P2 OVERTHETOP2
MB:B15P7 SKY DOWN
Two dual mono flange effects. This preset can work nicely with the same signal going to both
Machines. Use the SoftSlider to determine which input feeds which processor.
MA: B12P2 OverTheTop2
Similar to OverTheTop1, except the flange delay glides between 0.08 ms and 10.7ms. This flange
delay is patched to the LFO. The base delays are set to 10ms with a negative amplifier gain.
MB: B15P7 Sky Down
This preset tunnels downward due to the liberal amount of delay feedback. If the effect is too heavy,
lower the feedback amount.
Summary of Contents for 300L -
