Never, under any circumstances, look directly at the Sun, another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. White LEDs are very bright; do not look
at them as this may cause permanent damage to your vision. Take necessary precautions when using the device with
children or others who have not read or who do not fully understand these instructions. After unpacking your microscope
and before using it for the first time check for integrity and durability of every component and connection. Do not try
to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local
specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not apply
excessive pressure when adjusting focus. Do not overtighten the locking screws. Do not touch the optical surfaces
with your fingers. To clean the device exterior, use only special cleaning wipes and special optics cleaning tools
from Levenhuk.Abrasive particles, such as sand, should not be wiped off lenses, but instead blown off or brushed away
with a soft brush. Do not use the device for lengthy periods of time, or leave it unattended in direct sunlight. Keep
the device away from water and high humidity. Be careful during your observations, always replace the dust cover
after you are finished with observations to protect the device from dust and stains. If you are not using your microscope
for extended periods of time, store the objective lenses and eyepieces separately from the microscope. Store the device
in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire and other sources
of high temperatures. To avoid data loss or equipment damage, always close the application first, and then disconnect
the microscope from your PC. Wait until the illumination goes off completely, and disconnect the microscope.
Seek medical advice immediately if a small part or a battery is swallowed.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set
of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery
contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly
with regard to polarity (+ and -). Remove batteries from equipment that is not to be used for an extended period
of time. Remove used batteries promptly. Never attempt to recharge primary batteries as this may cause leakage, fire,
or explosion.Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion.Never heat
batteries in order to revive them. Remember to switch off devices after use. Keep batteries out of the reach of children,
to avoid risk of ingestion, suffocation, or poisoning.
Care and maintenance
