Note:
function keys are disabled when the microscope is connected to a computer as a camera.
The microscope is operated through the PortableCapture application. All the images and videos
will be saved to the computer's hard drive. Voice recording is not available during the connection.
Charging the battery
The battery has to be fully charged before turning the microscope on for the first time. Plug the power
cable into the power cable socket on the microscope body (5) and connect it to a power source.
The battery status indicator (23) will turn red. Once the battery is fully charged, the indicator will go
out. You can now disconnect the microscope from the power source and turn it on. The fully-charged
battery allows you to use the microscope for fourhours. The illumination will grow dim and the image
quality will decrease to inform you that the battery is low. Charge the battery, as described above.
Connecting the microscope to a TV-set
Plug in the RCA cable into the microscope and connect it to your TV-set (refer to the User Guide of your
TV-set for additional information). Turn on the TV and select the correct channel from the corresponding
menu of the TV-set (refer to the User Guide of your TV-set for additional information).
Attaching the tripod
Place the tripod on a stable surface. Connect the tripod to the threaded hole (10) on the microscope
and rotate the microscope until it locks in place. Do not apply excessive pressure during rotation,
as this may damage both the microscope and the tripod. Tripod height may be adjusted, if necessary.
