Microscope assembly
Installing the rechargeable battery
Open the battery compartment and insert the battery matching
the indicated polarity.
Note:
the battery has to be fully charged before installation
(refer to Charging the battery below).
Inserting the MicroSD card
A MicroSD card (purchased separately) is required to save captured images
and recorded videos. Turn the microscope off and insert the MicroSD card
into the corresponding slot on the microscope body until it locks in place
with a click.
Note:
do not apply excessive force when inserting the MicroSD card.
Try rotating the card, if it does not lock in place with ease.
Format the card before using it.
