IP CamSecure
4. Guard
4.1.11 System Event - Assign a System Event
Step 1
Step 2
Step 1:
Click and highlight
System
on the event type list, and click the
Insert Event
icon.
Step 2:
There are Four events. Select the event you want to detect.
4.1.12 System Event – Basic Setting
-
Basic Setting of Disk Space Exh austed, System Health Unusual,
Resource Depleted, and Network Congestion events.
Enable Event:
Check the box to activate the event.
Life Cycle:
Automatically cancel event when event disappears:
the
alarm/action will be cancelled once the abnormality is fixed or ends.
Manually cancel event or event continues triggered:
The
alarm/action will continue until being canceled from the Main
Console. The user currently not at the seat watching the screen will be
notified by the alarm.
Note:
To cancel the event: Click Start>Open Event Report>Cancel All
Events
Cancel event after timeout xx seconds:
Enable checkbox and setup
the timeout seconds to cancel the event after the time that you set
whatever the events disappear or not.
