LevelOne GTL-2881, User Manual

Page: 354 / 706

Chapter 12
| Security Measures
DoS Protection
– 354 –
To display port supplicant statistics for 802.1X:
1.
Click Security, Port Authentication.
2.
Select Show Statistics from the Step list.
3.
Click Supplicant.
Figure 225: Showing Statistics for 802.1X Port Supplicant
DoS Protection
Use the Security > DoS Protection page to protect against denial-of-service (DoS)
attacks. A DoS attack is an attempt to block the services provided by a computer or
network resource. This kind of attack tries to prevent an Internet site or service from
functioning efficiently or at all. In general, DoS attacks are implemented by either
forcing the target to reset, to consume most of its resources so that it can no longer
provide its intended service, or to obstruct the communication media between the
intended users and the target so that they can no longer communicate adequately.
This section describes how to protect against DoS attacks.
Parameters
These parameters are displayed:
◆
Echo/Chargen Attack – Attacks in which the echo service repeats anything
sent to it, and the chargen (character generator) service generates a continuous
stream of data. When used together, they create an infinite loop and result in a
denial-of-service. (Default: Disabled)
◆
Echo/Chargen Attack Rate – Maximum allowed rate. (Range: 64-2000 kbits/
second; Default: 1000 kbits/second)