LevelOne GTL-2881, User Manual

Page: 178 / 706

Chapter 5
| VLAN Configuration
Protocol VLANs
– 178 –
◆
Priority – The priority assigned to untagged ingress traffic.
(Range: 0-7, where 7 is the highest priority)
Web Interface
To map a protocol group to a VLAN for a port or trunk:
1.
Click VLAN, Protocol.
2.
Select Configure Interface from the Step list.
3.
Select Add from the Action list.
4.
Select a port or trunk.
5.
Enter the identifier for a protocol group.
6.
Enter the corresponding VLAN to which the protocol traffic will be forwarded.
7.
Set the priority to assign to untagged ingress frames.
8.
Click Apply.
Figure 89: Assigning Interfaces to Protocol VLANs
To show the protocol groups mapped to a port or trunk:
1.
Click VLAN, Protocol.
2.
Select Configure Interface from the Step list.
3.
Select Show from the Action list.
4.
Select a port or trunk.