LevelOne GSW-2493 User Manual Download Page 52

Page: 52 / 114

Add Trap Manager interface

Delete Trap Manager

1. Select

<Delete>

2. Choose the trap manager that you want to delete and then press “

Enter

”.

3. When pressing “

Enter

” will complete deletion.

LACP

The Link Aggregation Control Protocol (LACP) provides a standardized means for

exchanging information between Partner Systems on a link to allow their Link

Aggregation Control instances to reach agreement on the identity of the Link

Aggregation Group to which the link belongs, move the link to that Link Aggregation

Group, and enable its transmission and reception functions in an orderly manner. Link

aggregation lets you group up to eight consecutive ports into a single dedicated

connection. This feature can expand bandwidth to a device on the network.

LACP

operation requires full-duplex mode,

more detail information refers to IEEE 802.3ad.

You can configure and view all the LACP status.

Summary of Contents for GSW-2493



















































































































Search results

Summary of Contents for GSW-2493

Reviews:

Related manuals for GSW-2493

Brands by name

Popular brands

LevelOne GSW-2493, User Manual

Search results

Summary of Contents for GSW-2493

Reviews:

Related manuals for GSW-2493

Brands by name

Popular brands