manualshive.com logo in svg

LevelOne GSW-2493, User Manual, Page: 32 / 114

Share
Download
LevelOne GSW-2493 User Manual Download Page 32

 

26

 

VLAN Configuration 

 

You can configure VLAN in VLAN Configuration. There are four functions in VLAN 

Configuration mode: VLAN Configuration, Create a VLAN Group, Edit/Delete VLAN 

Group and Group Sorted Node. Follow the below description to configure VLAN. 

 

 

VLAN Configuration Main interface 

 

 

VLAN Configure 

 

Before starting to configure VLAN, you must select the VLAN mode in VLAN Configure 

function. Otherwise, user cannot create any new VLAN. 

1. Select the 

<Edit>

. 

2. Select the

 VLAN mode

 by using “

Space

” key. There are two VLAN modes: 

PortBase mode and 802.1Q mode.

 

„

 

802.1Q VLAN mode: 

configuration VLAN ID, Ingress Filter, and Acceptable 

Frame Type.

 

¾

 

VLAN ID Range:

 Type the PVID. The ID range is from 1~255. 

¾

 

Ingress Filter:

 It matches that Ingress Filtering Rule 1 on web. Only 

forward packets with VID matching this port’s configured VID. Press 

“

Space

” key to choose forward or drop the frame that VID not matching 

this port’s configured VID. 

Summary of Contents for GSW-2493



















































































































Reviews:

No comments