manualshive.com logo in svg

LevelOne GSW-2493, User Manual, Page: 12 / 114

Share
Download
LevelOne GSW-2493 User Manual Download Page 12

 

6

 

2. Hardware Description 

 

 

This Section mainly describes the hardware of the GSW-2493, and gives a physical 

and functional overview of the switch. 

 

 

Physical Dimension                                           

 

The GSW-2493 physical dimension is 

440mm(W) x 280mm(D) x 44mm(H)

. 

 

 

Front Panel                                             

 

The Front Panel of the GSW-2493 consists of 3 module slots. One module slot is 

located in rear-panel of the switch. 

 

 

LED Indicators                                       

 

The LED Indicators gives real-time information of systematic operation status. The 

LED indicators are located in every module. The LED indicators will be different for 

different module. The following table provides descriptions of LED status and their 

meaning.   

 

 

LED 

Status 

Description 

Green Power 

On 

Power 

Off 

Power is not connected 

Summary of Contents for GSW-2493



















































































































Reviews:

No comments