LevelOne GSW-2493 User Manual Download Page 72

Page: 72 / 114

IP configuration interface

Switch Setting

In Switch setting, it has three parts of setting – Basic, Advance, and Misc Config. We

will describe the configure detail in following.

Basic Switch Settings

In Basic Switch Setting, it displays the switch basic information.

System Name:

the name of switch.

System Location:

the switch physical location.

System Description:

the description of switch.

Firmware Version:

the switch’s firmware version.

Kernel Version:

the kernel software version.

Hardware version:

the switch hardware version.

MAC Address:

the unique hardware address assigned by manufacturer (default)

Fan 1:

display fan current status.

Fan 2:

display fan current status.

Module:

the module information, if the switch doesn’t install the module, then this

column will not display any information.

Summary of Contents for GSW-2493



















































































































Search results

Summary of Contents for GSW-2493

Reviews:

Related manuals for GSW-2493

Brands by name

Popular brands

LevelOne GSW-2493, User Manual

Search results

Summary of Contents for GSW-2493

Reviews:

Related manuals for GSW-2493

Brands by name

Popular brands