89
Once its forwarding port fails, the system will automatically upgrade its blocking port
to be the forwarding port of the Ring Master switch.
Enable Coupling Ring:
Enable the coupling ring function. Mark the check box to
enable the coupling ring function.
Coupling port:
Assign the member port which is connected to the other ring group.
Control port:
When Couple Ring check box is marked, you have to assign the
control port to form a couple-ring group between the two X-rings.
Enable Dual Homing:
Set up one of the ports on the switch to be the Dual Homing
port. For a switch, there is only one Dual Homing port.
Dual Homing function only
works when the X-Ring function enabled.
And then, click
Apply
to apply the configuration.
X-ring Interface
Note
When the X-Ring function enable, user must disable the RSTP. The X-Ring
function and RSTP function cannot exist in a switch at the same time.
Remember to execute the ‘Save Configuration’ action, otherwise the new
configuration will lose when switch power off.
Summary of Contents for GSW-0891
