42
sntp daylight
G
Enable daylight saving
time, if SNTP function
is inactive, this
command can’t be
applied.
switch(config)#
sntp daylight
sntp daylight-period
[Start time] [End time]
G
Set period of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)#
sntp
daylight-period 20060101-01:01
20060202-01-01
sntp daylight-offset
[Minute]
G
Set offset of daylight
saving time, if SNTP
function is inactive,
this command can’t be
applied.
switch(config)#
sntp
daylight-offset 3
sntp ip
[IP]
G
Set SNTP server IP, if
SNTP function is
inactive, this command
can’t be applied.
switch(config)#
sntp ip 192.169.1.1
sntp timezone
[Timezone]
G
Set timezone index,
use ‘show sntp
timzezone’ command
to get more
information of index
number
switch(config)#
sntp timezone 22
show sntp
P
Show SNTP
information
switch#
show sntp
show sntp timezone
P
Show index number of
time zone list
switch#
show sntp timezone
no sntp
G
Disable SNTP function switch(config)#
no sntp
Summary of Contents for GSW-0891
