59
to access the switch through the web browser for the securing switch management.
IP Security Mode:
when this option is in
Enable
mode, the
Enable HTTP Server
and
Enable Telnet Server
check boxes will then be available.
Enable HTTP Server:
when this check box is checked, the IP addresses among
Security IP1 ~ IP10 will be allowed to access via HTTP service.
Enable Telnet Server:
when checked, the IP addresses among Security IP1 ~ IP10
will be allowed to access via telnet service.
Security IP 1 ~ 10:
Assign up to 10 specific IP address. Only these 10 IP address
can access and manage the switch through the Web browser
And then, click
Apply
button to apply the configuration
Note
Remember to execute the ‘Save Configuration’ action, otherwise the new
configuration will lose when switch power off.
IP Security interface
Summary of Contents for GSW-0891
