3-26
Front Panel Display Management
User Authentication
To configure a port, user authentication is required when the system is locked.
The user will be prompted to enter the password. The password is composed
of four numeric digits represented by the four asterisks as shown in Figure
3.24.
The factory default password is "0000".
Press
Enter
. You will briefly see the SYS LOCKED message, then the
password request.
Figure 3.24 Password Verification
Press
Prev
once to select the first digit.
Press
Next
to select next asterisk.
Press
Prev
to select the next digit. Repeat to enter the password.
Press
Enter
. You will briefly see the PASSED message if the password is
correct and the system will be unlocked. If the password is incorrect,
FAIL will be displayed, and the user will have to re-enter the
password.
Selecting a Port
Press
Prev
or
Next
to select a port as show in the example in Figure 3.25.