3-12
Front Panel Display Management
Exiting the Menu Tree
To exit a sub-menu, cycle through each menu option until a “MAIN MENU”
or “BACK” is displayed in the Message Zone. Press the
Enter
key to return
to the Main Menu or previous menu level.
Utilization
Monitoring the traffic load is accomplished by simply selecting a port group
and then UTILIZATION from the main menu. While UTILIZATION is
displayed in the message zone the level of utilization for the enabled ports of
this port group is indicated by the bar gauges moving up and down as the
traffic load varies.
The reference for the level of utilization is based on the speed of the port that
is running. For example, a port that is running in 10Mbps half duplex, the
100% stands for the bandwidth of 10M. The following table shows the
relation for each speed:
SPEED
100% Stands for:
10M half duplex
10M
10M full duplex
20M
100M half duplex
100M
100M full duplex
200M
1000M half duplex
1000M
1000M full duplex
2000M
Table 3.5
Utilization Ratio
The UTILIZATION menu displays the utilization of all ports, and the port
number indicators indicate the port numbers.
