Front Panel Display Management
3-21
are displayed higher indicate the port is configured to the setting displayed in
the message Zone. The shorter bar scales under the port numbers indicate the
port is
not
set to the setting displayed in the message zone.
All ports can be running at the same or different settings. It is useful to check
the port setting to see if it has been running in the desired mode.
Press
Next
in the MAIN MENU to select the PORT STATUS menu as
shown in Figure 3.18.
Figure 3.18 Port Status Menu
Press
Enter
to go to the port selection menu. The port selection menu
allows users to select “all ports” or “a single port” for monitoring
the port status.
Press
Prev
and
Next
to scroll the menu options back and forth.
Press
Enter
to make a selection. The information will be displayed
automatically.
Status Indicators
The following is a list of the port status indicators:
•
10M PORTS
•
100M PORTS
•
1000M PORTS
•
HALF DUPLEX
•
FULL DUPLEX
•
ENABLED
