Package Contents
FCS-1081
/
FCS-1081A
Fixed
Lens
Camera
Stand
CD
Manual/Utility
Quick Installation Guide
Hardware Installation
Depending on the user’s application, an Ethernet cable may be needed.
The Ethernet cable should meet the specs of UTP Category 5 and not
exceed 100 meters in length.
Connect the power adapter jack to the Network Camera before
plugging in to the power socket. This will reduce the risk of accidental
electric shock.
Since FCS-1081/FCS-1081A is a PoE IP camera, it could work without attaching to power outlet as long as
it connects to PoE switch.
The Network Camera will first detect Ethernet. Until the Network Camera is connected to Network, the LED
will become green and flash. Operating in the Network mode, the green LED will flash every second as
heartbeat to indicate alive.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the
power adapter if users want to have a redundant power. If the LED turns out to be steady green after
self-test, go to next paragraph “Software Installation”.
