To adjust the camera setting
Consult with the dealer of the peripherals for correct installation.
The Network Camera provides the auto iris lens connector. If the
auto iris lens is used, the dip should be adjusted to AI option. And
you also have to select VIDEO drive or DC drive lens by select
correct iris mode. The pin assignment of the auto iris lens connector
is as follows.
Video Drive
DC Drive
1. 12V, Power Source
1. DAMP -
2. Not used
2. DAMP +
3. IRIS
3. DRIVE +
4. Ground
4. DRIVE -
BLC / OFF
Back Light Control
AES / AI
Auto Electronic Shutter or Auto-Iris lens
DD / VD
DC drive or VIDEO drive auto-iris lens
LEVEL
Brighten or darken the video image
To adjust the lens
There is a fixed lens free bundled. Whereby revolving the lens, it can be focused on. However, users shall
loosen or tighten the gray loop by using the wrench attached in the package.
1.Unscrew it first
2. Loosen or tighten
the gray loop.
