5
Reset+WPS Button
(WCS-0040 Only)
This is 2-in-1 button for WCS-0040 only,
1.
Push the WPS button on the device and on your other wireless
device to perform WPS function that easily creates an
encryption-secured wireless connection automatically.
•
WPS PBC Mode. When pressed and released (less then 3
seconds), the FCS-0040/WCS-0040 will be in the WPS PBC
mode (Auto link mode).
•
WPS Pin Code Mode. When pressed and held for over 3
seconds, the FCS-0040/WCS-0040 will be in the WPS Pin Code
mode.
2.
This button is recessed; you need a pin or paper clip can be used
to depress it. It can be activated at any time the camera is in the
"ready" mode.
•
Reset to manufacturer default valued and reboot. When pressed
and held over 10 seconds, the settings of FCS-0040/WCS-0040
will be set to their default values.
Note:
After this procedure is completed, the Power LED will blink three
times to confirm that the reset was completed successfully.
Reset Button
(FCS-0040)
This button is recessed; you need a pin or paper clip can be used to
depress it. It can be activated at any time the camera is in the
"ready" mode.
•
Reset to manufacturer default valued and reboot. When pressed
and held over 10 seconds, the settings of FCS-0040/WCS-0040
will be set to their default values.
Note:
After this procedure is completed, the Power LED will blink three
times to confirm that the reset was completed successfully.
Package Contents
The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately.
1.
FCS-0040/WCS-0040
2.
Camera Stand
3.
Antenna (WCS-0040 Only)
4.
Power adapter
5.
Installation CD-ROM
6.
Quick Installation Guide
