LevelOne FCS-0040 User Manual Download Page 56

Page: 56 / 63

Maintenance Screen

Data - Maintenance Screen

Administrator Login

Administrator
ID

Enter the name for the Administrator here.

Spaces, punctuation, and special characters must NOT be used in the
name.

Administrator
Password

The password for the Administrator.

Verify Password

Re-enter the password for the Administrator, to ensure it is correct.

Firmware Upgrade

Upgrade File

Click the "Browse" button and browse to the location on your PC
where you stored the Firmware file. Select this file.

Start

Click this button to start the Firmware. When the upgrade is finished,
the FCS-0040/WCS-0040 will restart, and this management connection
will be unavailable during the restart.

Clear File Name

This does NOT stop the Upgrade process if it has started. It only clears
the input for the "Upgrade File" field.

Summary of Contents for FCS-0040
































































Search results

Summary of Contents for FCS-0040

Reviews:

Related manuals for FCS-0040

Brands by name

Popular brands

LevelOne FCS-0040, User Manual

Search results

Summary of Contents for FCS-0040

Reviews:

Related manuals for FCS-0040

Brands by name

Popular brands