background image

- 6 - 

 

 

Paired devices remain paired even when: 

-

  One of the devices is not powered on. 

-

  A service connection is interrupted or the service stopped. 

-

  One or both devices are rebooted. 

 

FAQ

  

1.   Why doesn't the Headset work with my mobile phone after the Headset has been fully charged and 

switched on? 

     

 A:

   You have to activate the Bluetooth function of your mobile phone first and pair it with the 

Headset. 

  

2.   Does the Headset work with all types of mobile phones? 

      

A: 

   No. It works only with Bluetooth enabled mobile phones. 

  

3.   What is the operation distance between the Headset and a Bluetooth mobile phone? 

    

 A:

  The Headset has been tested and approved by BQB. It is fully compliant to Bluetooth v. 1.1, class 

II, 

            Headset Profile.   The maximum operation distance can be up to 10 meters, however it will be 

affected and 

    shortened by different circumstances and different brands of mobile phones.  Some mobile 

phones are      with less operative distance. 

  

4.   When my mobile phone was searching for the Headset, why did several Bluetooth devices appear on 

my mobile phone? 

    

 A:

   Most Bluetooth enabled mobile phones with Bluetooth function activated can search for more 

than one Bluetooth device 

            within   operative  range.   The  Headset will appear as "BT Headset" or "Unknown Device" on 

your mobile phone   

            after having been found by your mobile phone. 

  

5.   Why can’t my mobile phone find the Headset? 

     

A:

   If the Headset is not in pairing mode, your mobile phone won't find the Headset. Please set the 

Headset 

into 

pairing 

mode before starting your  mobile  

phone 

to search 

for 

the 

Headset.   (Please refer to the User Manual for detailed instructions.) 

  

6.   Do I need to pair the Headset with my mobile phone every time I use it? 

    

 A: 

 No. Once the Pairing is set up between the two devices, they will remain paired even when one or 

both devices are powered off. 

  

7.   Why is there a disturbance noise coming from the Headset? 

     

A:

   The performance of the Headset will be affected by two factors 

  1) whether your mobile phone is in a good signal area.    If your mobile phone is in week signal 

area, you won't hear clearly with the Headset. 

Summary of Contents for BLH-1000










Reviews: