- 5 -
Disconnection may happen when there is more than one Headset paired with your mobile phone.
Product care
-
Use of non-original accessories may result in performance deterioration, injury, products’ damage,
electronic shock, and warranty termination.
-
Attempt to disassemble your Headset may damage it, and the warranty will be void.
-
Do not put the Headset in a dusty place.
-
Use only a clean soft cloth to clean your Headset.
-
When the Headset is not in use, always keep it in its case.
-
Do not allow children to play with your Headset, as they may injure themselves and damage the
Headset as well.
-
Do not place the Headset in an extremely hot or cold temperature, if the Headset will not be used for
a while.
Children
Do not allow children to play with your Headset, as the small parts may cause a choking hazard.
Travel Charger
-
The charger is designed for indoor use only. Do not use it for outdoors.
-
The charger must be connected to the designated power sources as marked.
-
When removing the charger from an outlet, never pull the charger cord, as it may damage the
charger.
Battery Information
-
New batteries
-
For first time use, plug the adapter into the Headset and charge it at least 4 hours until the red
indicator turns off.
-
Battery care
-
Only qualified Service Centers are authorized to remove or replace the battery.
-
The rechargeable battery has a long service life if treated with care.
-
The battery can only be charged in a temperature range of –10 C to 45 C.
-
Use the battery in room temperature for maximum battery capacity.
-
The battery capacity may be reduced if operating in a cold environment.
-
The Headset has to be recharged every two months, when it is not in use during a long time.
About Pairing
What is Pairing?
Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent
security link between the devices and enable quick access to the services provided without the need
to enter passkeys.
Bluetooth Passkey
Each headset has a default passkey
1234
for pairing, which is stored in its internal memory. You are
usually required to enter the passkey
1234
in a pairing process with a Bluetooth mobile phone or other
devices, however it depends on the kind of Bluetooth device that the headset is connected to. Please
refer to the users’ manual of the devices for the specific operation.
