- 4 -
Mute
Press both S1 and S2 buttons in the same time for a Mute function. Press both S1 and S2 buttons in
the same time again to disable the Mute function.
Connect with a PC or PDA
You are allowed to connect the Headset with a Bluetooth enabled PC or PDA that is with Audio Gateway
Profiles supported. Please refer to the user manual of your Bluetooth enabled PC or PDA for a setup
information.
Low Battery
When the
red
indicator starts to flash, it indicates that the Headset is running low on battery.
Charge the Headset for 2 hours until the
red
indicator turns off.
Important Information
Notes for Nokia Bluetooth phones
1. Set the headset as default authorized.
Please ensure that the headset is allowed by the phone to connect without authorization. To set it as
authorized, go to “Connectivity” > “Bluetooth” > “Paired devices” > select “BT Headset-F” > press
“Options” > choose “Set as authorized”.
2. Volume bar appears abnormally.
Due to different design of mobile phones, some models (such as N6230, N6820) will check volume
status whenever Bluetooth connection is building up. The volume bar may appear while using
Bluetooth headset. Please skip it.
3. Headset disconnect accidentally with N6600.
The connection of headset may be lost accidentally. Please re-connect it if the headset is
disconnected. To re-connect headset with mobile phone, press S1 button of headset and wait for
connecting message.
Trouble
Shooting
4. The red LED indicator flashes.
It indicates that the Headset is running low on battery. Charge the
Headset for 2 hours until the red LED indicator turns off.
5. The Headset cannot be activated after being charged for 20 minutes.
To activate the Headset, it needs to charge the battery at least for 40 minutes.
However, it is highly recommended to fully charge the battery before use.
6. No indication of charging is shown.
For the Headset battery that is empty, or has not been used for a long time,
it may take a couple of minutes for the Headset indicator to show charging status
with a steady red light.
7. No sound contact between Headset and other devices.
-
Make sure that the two devices have been paired.
-
Make sure that the Headset is turned on.
-
Make sure that the two devices are within a working range.
-
Make sure that your Mobile Phone is within signal strength.
-
Some Bluetooth mobile phones can support only one Bluetooth Headset.
