User Manual of Network Camera
132
Configuration > Advanced Configuration> Storage > Record Schedule
Figure 7-5
Recording Schedule Interface
2.
Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3.
Set the record parameters of the camera.
Figure 7-6
Record Parameters
⚫
Pre-record: The time you set to start recording before the scheduled time or
the event. For example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5 seconds, the camera starts to record at 9:59:55.
The Pre-record time can be configured as No Pre-record, 5 s, 10 s, 15 s, 20 s,
25 s, 30 s or not limited.
⚫
Post-record: The time you set to stop recording after the scheduled time or the
event. For example, if an alarm triggered recording ends at 11:00, and the
post-record time is set as 5 seconds, the camera records until 11:00:05.
Summary of Contents for 57107207
Page 1: ...User Manual of Network Camera 1 User Manual Network Camera...
Page 24: ...User Manual of Network Camera 24 web browser and log in again after installing the plug in...
Page 143: ...User Manual of Network Camera 143 Figure 8 3 Overlay Content Settings...
Page 162: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...