User Manual of Network Camera
127
2)
Click-and-drag the detection line to adjust its position.
3)
Click-and-drag the two end points of the detection line to adjust its length.
4)
To delete the detection line, click the
Delete Line
button.
6. An arrow indicating the entering direction of people is shown after the
detection line is selected. You can click the
Change Direction
button to adjust
the arrow direction to opposite side.
7. Click the
Reset Counter
button, and the number of the people entered and
exited will be cleared to zero.
8. Click
Edit
to set the arming schedule.
9. Check the checkbox of
Notify Surveillance Center
to set the linkage action.
10. Click
Save
to save the settings.
❖
Counting Statistics
Steps:
1. Click
People Counting Statistics
to enter the data statistics interface.
2. Select the report type by clicking the drop-down menu. Daily report, weekly
report, monthly report, and annual report are selectable.
3. Select the
Statistics Type
as People Entered or People Exited.
4. Select the
Statistics Time
.
Note:
Daily report calculates the data on the date you selected, weekly report
calculates for week your selected date belongs to, monthly report calculates
for the month your selected date belongs to, and the annual report calculates
for the year your selected date belongs to.
5. Click
Counting
to calculate the data.
6. Select to export the
Statistics Result
as Table, Bar Chart, or Line Chart.
Note:
If you select table to list the statistics, there is an
Export
button to
export the data in an excel file.
Summary of Contents for 57107207
Page 1: ...User Manual of Network Camera 1 User Manual Network Camera...
Page 24: ...User Manual of Network Camera 24 web browser and log in again after installing the plug in...
Page 143: ...User Manual of Network Camera 143 Figure 8 3 Overlay Content Settings...
Page 162: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...
