User Manual of Network Camera
68
Configuring Fixed Region for ROI:
Steps:
1.
Enter the ROI settings interface:
Configuration> Advanced Configuration> Video/Audio> ROI
2.
Check the checkbox of
Enable
under Fixed Region item.
3.
Select the stream type for ROI encoding.
4.
Select the region from the drop-down list for ROI settings. There are four fixed
regions selectable.
5.
Click the
Draw Area
button, and then click-and-drag the mouse to draw the
region of interest on the live video.
6.
Select the ROI level to set the image quality enhancing level. The larger the value
is, the better the image quality is.
7.
Input the region name for ROI as desired.
8.
Click
Save
to save the settings.
Configuring Dynamic Region for ROI:
1.
Enter the ROI settings interface:
Configuration> Advanced Configuration> Video/Audio> ROI
2.
Check the checkbox of
Enable Face Tracking
, and then the captured face picture
is set as region of interest.
Note:
To enable face tracking function, the face detection function should be
supported and enabled.
3.
Check the checkbox of
Enable License Plate Tracking
, and then the captured
license plate picture is set as region of interest.
Note:
To enable license plate tracking function, the vehicle detection function
should be supported and enabled.
4.
Respectively set the ROI level. The larger the value is, the better the image
quality is.
5.
Select the stream type for ROI encoding.
Summary of Contents for 57107207
Page 1: ...User Manual of Network Camera 1 User Manual Network Camera...
Page 24: ...User Manual of Network Camera 24 web browser and log in again after installing the plug in...
Page 143: ...User Manual of Network Camera 143 Figure 8 3 Overlay Content Settings...
Page 162: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...
