Levana LV-TW300, User Manual

Page: 18 / 26

TROUBLESHOOTING
If the signal is poor, or there is interference:
• If there is a microwave oven or other electrical devices being used in the path between the camera and
monitor, they may affect the signal range. Try powering off the other electrical devices to see if this
improves performance
• Pair the monitor and camera again to see if this resolves the issue
• Make sure the camera and the monitor are within range of each other (range of approximately 100 ft;
200 ft in a clear line of sight)
The screen is black and the buttons are not working:
• Make sure you are not in Standby Mode
• Make sure the monitor is charged and switched on
The screen says there is no signal:
• Make sure the camera and monitor are plugged into a working power source
• Try turning the camera and monitor OFF and ON again
• Try pairing the monitor and the camera
• Make sure the camera and the monitor are within range of each other (range of approximately 100 ft;
200 ft in a clear line of sight)
The Night Vision is not working (not turning on or off)
• Check the brightness/darkness of the room
• The night vision turns on automatically in the dark. If the room is to bright the night vision will not turn
on, if the camera is in a dark area, the night vision will not turn off
1. Optimum range is 100ft when signal is passing through walls or floors. Microwave ovens (when in use)
may cause signal disruption at close range. Buildings with metal frames may also cause signal disruption.
Maximum transmission range is 200ft.
2. Included rechargeable lithium-ion battery provides up to 4 hours of continuous use.
3. Night vision range up to 10ft under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
FEATURE NOTES
16