Levana LV-TW300, User Manual

Page: 17 / 26

MONITOR SETUP
To Use the Talk Function:
1. Make sure your monitor is in live viewing mode.
2. Press and hold the Talk button and speak into the front of the
monitor. You must hold the Talk button down while you are
speaking for your voice to be heard by the camera.
3. When you are finished speaking release the Talk button.
Talk to Baby Intercom Function
The TWINKLE300 allows for two way communication. This means that you can talk into the monitor and your
voice will be heard through the camera, and that your child can talk back to you. This is a good function for
toddlers and older children.
Pairing the Camera and Monitor
The monitor and camera need to be paired together to work properly. This ensures the interference free
connection and also prevents users from intercepting the video signal. If the signal between the camera and
monitor is lost, or to improve the connection (audio/video) quality, you can pair the monitor and camera back
together. In most cases, turning the power ON and OFF on the camera and monitor can re-sync them. However,
if turning the camera and monitor OFF and ON doesn’t work, you can manually pair them. Make sure the
camera and monitor are close to one another before beginning the pairing process.
To Pair the Monitor and Camera:
1. Take a small object, such as a pin and press the
button on the bottom of the monitor next to the
word “Pair”.
2. You will hear a beep and the screen will read PAIRING
and also count down from 30 seconds.
3. Within 30 seconds you must use a small object,
such as a pin or toothpick to press the “Pair” button,
located on the back of the camera.
When both buttons are pressed within 30 seconds,
the camera and monitor will pair. If the buttons are
not pressed within 30 seconds the monitor will read
“no signal.”Pairing the camera and monitor can also
improve audio quality.
15
↑