Levana LV-TW300, User Manual

Page: 16 / 26

MONITOR SETUP
Audio Information (Automatic Mute)
This unit is not designed to be transmitting audio all of the time. If there is a low volume level (background
noise) the monitor will turn off the audio to save power and avoid having noise constantly coming through
the monitor. This is most helpful at night so that only when there are sounds in the baby’s room will the audio
activate and be heard through the monitor.
Alarm
The TWINKLE300 gives you the option to turn on an audible alarm which will sound if noise is detected.
To Turn the Alarm ON/OFF:
1. Adjust the alarm volume on the side of the monitor.
2. The higher you adjust the volume, the louder the alarm will be. To completely shut the alarm off adjust
the volume to the lowest level.
3. The volume level of the beeps will indicate when you are at the highest and lowest levels.
Standby Mode
The TWINKLE300 system lets you turn off the monitor while you are sleeping. It will turn back on and alert you
if noise is detected.
To put the TWINKLE300 into Standby Mode:
1. Press the STBY button on the front of the monitor. This will turn off the screen but the LED on the top of
the monitor will glow.
2. When sound is detected from the camera, the screen will turn on automatically and if set, the alarm will
sound. The screen will turn back off after 5 seconds of no audio.
3. To turn off standby mode press the STBY button again.
NOTE: The volume, brightness and talk functions are only adjustable while the camera is being
viewed on screen. (Not while the monitor has a black screen in Standby Mode.)
14