Levana LV-TW300, User Manual

Page: 11 / 26

To Mount the Camera to a Crib:
1. Make sure the camera is plugged into a
power source.
2. Place the top portion of the crib mount into
the area, located at the back, on the bottom
of the camera mount. (The descended
square on the crib mount will fit into the
square area on the back portion, on the
bottom of the camera mount easily.)
3. Slide the crib mount upwards (to match
with the camera mount) so that it is fitted
directly onto the camera mount.
4. Attach the Velcro strap to the desired area of
the crib. Make sure the strap is secured onto
the crib tightly.
Mounting the Camera to a Crib
The crib mount is able to slide into the camera mount quickly and efficiently, and hold secure onto the side of
a crib, making it impossible to completely pull the cord out.
CAMERA SETUP
To Mount the Camera to a Wall or Table Top:
1. Mark the wall using the included template.
2. Drill the marked holes and insert the plastic fittings.
3. Plug the power cable into the camera.
4. Screw the two provided screws 4cm away from one
another. Use the included cut out at the back of
the manual.
5. Place the two holes on the back of the mount on top of
the screws and slide the mount into place. The screws
will hold the camera secure and in place.
Mounting the Camera to a Wall or Table
The mounting equipment gives you the option to put the camera on a table top or mount and secure it on
a wall.
3.
9
1. 2.