Installation
Leuze
electronic
18
ODS 96
Leuze electronic
5
Installation
5.1
Storage, Transportation
Unpacking
©
Check the packaging for any damage. If damage is found, notify the post
office or shipping agent as well as the supplier.
©
Check the delivery contents using your order and the delivery papers:
• delivered quantity
• device type and model as indicated on the name-plate
• accessories
• operating manual
©
Save the original packaging for later storage or shipping.
If you have any questions concerning your shipment, please contact your
supplier or your local Leuze electronic sales office.
©
Observe the applicable local regulations when disposing of the packaging
materials.
5.2
Mounting
Mounting systems are available which have to be ordered separately at
Leuze electronic. For order numbers please refer to section 4.5 "Accesso-
ries". Apart from this, the through-borings can be used for individual mounting
of the ODS 96, depending on the area of application.
Mounting of the ODS 96
To avoid errors while the object enters the measurement beam, correct
movement direction of the objects has to be observed. The following graphics
show instructions on the installation of the ODS 96:
Preferred movement of
the objects
Figure 5.1: Preferred movement of the objects
