Leuze
electronic
Description
Leuze electronic
ODS 96
9
3.2.2
Positioning Tasks
For simple positioning tasks, all ODS 96 M/S types with two teachable
switching outputs are suitable.
The ODS 96 is mounted in a way to enable positioning in the direction of the
measuring beam. Both switching outputs are tought to the required position.
In case the distance is smaller than the tought position, switching output 1 is
active and switches the positioning motor to enlarge the distance. In case the
distance is bigger than the tought position, switching output 2 is active and
switches the positioning motor to reduce the distance.
Using this method, positioning tasks can be performed without difficulties.
Figure 3.1: Application example "Positioning Tasks"
3.2.3
Filling Level Control for Bulk Goods
For the filling level control in connection with control of material flow, all ODS
96 types with one switching output are suitable. However, the programming
software is required to adjust the hysteresis.
The ODS 96 is mounted ensuring that its measuring beam meets the surface
of the bulk good vertically. Using the software, function of Q1 is set to "light
switching" and the minimal filling level entered as lower limit. The upper limit
is set to the maximum range of the ODS (600 mm or 2000 mm, depending on
the ODS type). The distance between minimum and maximum filling level is
entered as hysteresis.
Old Stack
New Stack
Positioning
