Leuze electronic
MC3x
7
Before using the MC3x Series, a risk evaluation must be performed according to valid standards (e.g.
EN ISO 12100-1, EN ISO 13849-1, EN ISO 14121). The result of the risk assessment determines the
required safety level of the Safety Relay, sensor and actuator.
The realizable category of integration in control circuits acc. to EN ISO 13849-1 is dependent on the used
contact block, wiring and evaluation.
For mounting, operation and testing, document MC3x Magnetically Coded Sensors with MSI-MC3x
Safety Relay , the application information as well as all relevant national and international standards, regu
-
lations, rules and directives must be observed. Relevant and supplied documents must be observed,
printed and handed to the affected personnel.
Before working with Safety Relay, sensor and actuator completely read and understand the documents
applicable to your task.
In particular, the following national and international legal regulations apply for the start-up, technical
inspections and work with safety components:
Machinery directive 2006/42/EC
Electromagnetic compatibility directive 2004/108/EC
EN 1088, Interlocking devices associated with guards
EN 60204-1, Electrical equipment of machines
EN 60947-5-3, Requirements for proximity switches
Use of Work Equipment Directive 89/655/EEC supplemented by Directive 95/63 EC
OSHA 1910 Subpart 0
Safety regulations
Accident-prevention regulations and safety rules
Ordinance on Industrial Safety and Health and Labor Protection Act
Device Safety Act
For safety-related information you may also contact the local authorities (e.g., industrial inspec
-
torate, employer's liability insurance association, labor inspectorate, occupational safety and
health authority).
Make certain that, during all conversions, maintenance work and inspections, the system is securely
shut down and protected against being restarted.
Summary of Contents for MC330-S1x
Page 58: ...Leuze electronic MC3x 58 ...
