Leuze electronic
MC3x
22
Figure 6.5: Approach direction on the same level
Select the position of the sensor on the fixed part of the guard (see chapter 6.1 Selecting the position
and arrangement of sensor and actuator ).
Select the position of the actuator on the moveable part of the guard (see chapter 6.1 Selecting the
position and arrangement of sensor and actuator ).
Drill the bore holes acc. to the specified dimensions (see chapter 14 Dimensions and weights ).
For round actuators, take into account the anti-twist protection by providing an appropriate recess.
Loosely screw the sensor and actuator at the defined positions. Use the washers.
Align sensor and actuator with one another so that when the guard is closed, the markings (e.g., arrows,
notches, lines) are aligned, i.e., are opposite one another. A lateral offset reduces the switching dis
-
tance.
Figure 6.6: MC388x
Figure 6.7: MC336x
Figure 6.8: MC330x
Summary of Contents for MC330-S1x
Page 58: ...Leuze electronic MC3x 58 ...
