Configuration
Leuze electronic
MA 235
i
43
TNT
35/7-2
4
V
Table 9.3:
General gateway information
Table 9.4:
Current states of the status and control bits
Table 9.5:
ASCII configuration
Table 9.6:
CANopen parameters MA 235
i
Selected scanner
Currently selected Leuze device (selected via switch S4).
Gateway mode
Transparent or Collective mode.
Ring buffer fill level
Current fill level of the ring memory in Collective mode (ASCII->Fieldbus).
1024 bytes max.
Received ASCII Frames
Number of received ASCII frames.
ASCII Framing Error (GW)
Number of received framing errors.
Number of Received CTB's
Number of CTB commands.
Number of Received SFB's
Number of SFB commands.
Command-Buffer fill level
Current fill level of the ring memory in Command mode (fieldbus->ASCII).
1024 bytes max.
Number of send fieldbus frames
Number of frames sent via the fieldbus.
Number of invalid commands
Number of invalid commands.
ND
Current status of ND bit.
Data loss
Current status of data loss bit.
ASCII-Start-Byte
Currently configured start byte
(dependent on switch position S4).
ASCII-End-Byte1
Currently configured stop byte 1
(dependent on switch position S4).
ASCII-End-Byte2
Currently configured stop byte 2
(dependent on switch position S4).
ASCII baud rate
Currently configured baud rate
(dependent on switch position S4).
ASCII warm start status
Indicates whether the ASCII memory has detected and accepted a valid config-
uration.
Input Data length
Length of the data received (Rx, 8Byte).
Output Data length
Length of the data supplied (Tx, 8Byte).
Node ID
Participant address of the address switch.
Baud Rate[kBaud]
Set baud rate.
