Applications
12
GS 754B
Leuze electronic
5.2
Edge measurement and height verification
With this measurement, the sensor expects only one edge within the measurement field. If
more or fewer edges are detected by the system, depending on the configuration (see
chapter 6.4), this leads to an error message.
Figure 5.3:
Edge measurement and height verification
Figure 5.4:
Edge measurement - Detection of 1 edge
Various configurations are possible with this measurement (see chapter 6.4).
The following only applies to devices with an analog interface:
1.
Linear edge measurement over the entire measuring range (s. point 8)
2.
Teach-in edge measurement with 5V-output at teaching point
1 edge
Transmitter
