Device configuration
14
GS 754B
Leuze electronic
6
Device configuration
6.1
General information
To configure the GS 754B forked photoelectric sensor, you require a PC with an RS 232
interface and a terminal program with the following setting. For this, use the corresponding
KB-ODS 96-1500 cable (part no. 50082007).
6.2
Terminal program
Any terminal or modem program that can access the serial interface(s) of your PC can be
used for the configuration.
Under Microsoft
®
Windows
®
95/98/NT/2000, you can use the HyperTerminal, for example.
6.2.1
Basic configuration of the terminal program (interface P)
Table 6.1:
Basic configuration of the terminal program (interface P)
Transmission rate
9600bit/s
Data bits
8
Parity
None
Stop bits
1
Protocol
None
