Leuze electronic DCR 202i, Original Operating Instructions

Page: 51 / 76

Interfaces – Communication
Leuze electronic DCR 202i 51
Manual definition of the reference code
Teach-in
Acknowledgment yyy zzzzzz
yyy Read quality in [%].
zzzzzz Code information
Command JP
Command RS
Description This command can be used to define a new reference code in the code reader by
means of direct input via the serial interface or the Ethernet interface.
Parameter RSyvxxzzzzzzzz
y, v, x and z are placeholders (variables) for the actual input.
y Def. reference code no.
1 (Code 1)
v Storage location for reference code:
3 RAM only
xx Defined code type (see command 'CA')
z Defined code information (1 … 244 characters)
Acknowledgment RS=x
x Status
00 Valid 'Rx' command
01 Invalid command
02 Insufficient memory for reference code
03 Reference code has not been saved
04 Reference code invalid
Example Entry = RS103211032010
Code 1 (1), RAM+EEPROM (0), DataMatrix ECC 200 (32), code information
Command RT
Description This command enables a reference code to be defined quickly by reading an exam
-
ple label.
Parameter RTy
y Function
1 Defines reference code 1