Safety
Leuze electronic
DCR 202i
8
2
Safety
This code reader was developed, manufactured and tested in accordance with the applicable safety stan
-
dards. It corresponds to the state of the art.
2.1
Intended use
The code readers of the DCR 200i series are camera-based code readers for all commonly used bar
codes, stacked codes and DataMatrix codes as well as for codes of the GS1 DataBar family.
Areas of application
The code readers of the DCR 200i series are especially designed for the following areas of application:
• Packaging systems
• Mounting/handling technology
• Analysis technology
2.2
Foreseeable misuse
Any use other than that defined under Intended use or which goes beyond that use is considered
improper use.
CAUTION
Observe intended use!
Only operate the device in accordance with its intended use.
The protection of personnel and the device cannot be guaranteed if the device is operated in a manner
not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.
Read the technical description before commissioning the device.
Knowledge of this technical description is an element of proper use.
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the device is operated in a manner
not complying with its intended use.
Only operate the device in accordance with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by improper use.
Read these original operating instructions before commissioning the device.
Knowledge of the original operating instructions is an element of proper use.
NOTICE
Integrated illumination!
The code readers of the DCR 200i series correspond to the following classification with respect to the
integrated illumination:
Illumination red: risk group 0 (exempt group) in acc. with EN 62471
NOTICE
Comply with conditions and regulations!
Observe the locally applicable legal regulations and the rules of the employer's liability insurance asso
-
ciation.
